Unparalleled in Performance.
Highland Tank provides you with the strongest and most reliable oil/water separators in the industry.
Our separators are designed to remove oil, grease, light petroleum products, and oily coated solids from a variety of wastewater discharges.
The technology used to produce ordinary metering pumps has barely changed in over a generation. As a result, ordinary metering pumps have operational limitations and greater cost consequences.
Hydra-Cell® is not an ordinary metering pump. Hydra-Cell® Metering Solutions pumps enable you to meet and, in most cases, exceed API 675 performance standards with virtually pulse-less, linear flow while providing many other operational benefits.
Imo® Model 3E pumps are three screw, positive displacement, rotary pumps designed and engineered for excellent suction capability over a wide range of fluid viscosities. Flow rates (1 to 100 GPM) are proportional to rotating speed when the pump is operated within the recommended pressure range. The pump has the ability to self-prime in a piping system designed to facilitate this feature.
Hydra-Cell® T80 Series pumps feature an exclusive sealless diaphragm design that eliminates packing and plunger wear, leakage, external lubrication and emission - resulting in lower costs of ownership and maintenance and longer life than traditional packed pumps.
Hydra-Cell positive displacement pumps feature a seal-less pumping chamber and hydraulically-balanced diaphragm design, enabling the pumps to provide leak-free, low-maintenance performance while processing difficult fluids over a wide range of pressures and flows.
Hydra-Cell pumps can run dry without damage and the seal-less design and horizontal disk check valve enable the pump to handle abrasive slurries and particulates (up to 500 microns) that can destroy other pumps. In addition, Hydra-Cell D/G Series pumps provide repeatable, accurate output – ideal for metering and dosing applications.
These are heavy duty pumps with a simple, compact design. They offer a wide range of flow rates from 0.1 to 37 gpm (0.4 to 128 l/min) and pressures up to 2500 psi (170 bar). Multiple diaphragms minimize pulsations, so Hydra-Cell operates virtually pulse-free, often eliminating the need for expensive pulsation dampeners.
Series 6D Imo® Pumps are medium pressure lube oil pumps. Typical applications include crude oil pipeline service, fuel atomization for burning in a steam boiler, fuel injection for combustion gas turbines, fluid power service on hydraulically operated machinery, gas sealing in centrifugal compressors and hydrostatic bearing support.
These pumps are hydraulically balanced in both the axial and radial directions which eliminates bearing loads due to discharge pressure. The single bearing is external to the liquid pumped and does not rely on the lubricating qualities of the pumped liquid. The single mechanical seal is exposed only to inlet pressure. Very low airborne noise levels are normal for Imo® three screw positive displacement pumps as are high operating efficiencies and non-pulsating delivery of flow.
The Imo CIG® pump line is a family of rugged, reliable, high pressure pumps with silent, ripple-free performance. Longer life, lower pressure ripple, lower contamination sensitivity and maximum energy savings result in the highest "Total Savings of Ownership" across the entire life-cycle of your pumping equipment solution.
Your pumping requirements demand fluid transfer solutions that are engineered and manufactured with an in-depth knowledge of the unique advantages of progressing cavity technology. Allweiler PC pumps from Colfax® deliver reliable, efficient and stable performance for a wide range of liquids including highly viscous, neutral or aggressive fluids with entrained air, or even with fiber and solids content.
Series 3D is a general purpose three screw pump available in 19 different displacements. These pumps incorporate full hydraulic balance which cancels axial and radial thrust loads due to discharge pressure.
Ideal for low pressure lube oil applications.
Superior Tank Co. Inc. (STCI) is the industry leader and has been manufacturing and installing Bolted and Welded Steel Storage Tanks since 1984. Our operation centers located in Rancho Cucamonga, CA, Bakersfield, CA, and Houston, TX allow us to service the entire United States, Canada and Mexico. The ability to place the bolted tanks in shipping containers allows us to service the entire world. We are one of the few manufacturing companies that fabricate our own Bolted Steel Storage Tanks from raw materials, providing us complete control over engineering, quality and delivery schedules.
Haight® Pump is proud to introduce the first installment in our newest addition to the Haight® product family of Pumps That Perform, continuing a 70 year old tradition of supplying our customers with rugged, reliable, and innovative pumps. We've combined our versatile DIU Ductile Iron Universal Series pump design with stainless steel and corrosion resistant materials to meet the needs of our customers ever changing process systems.
Cylindrical Aboveground and Underground Passive Grease Interceptors.
Customized to Meet Your Application.
Passive Grease Interceptors (PGI) help FSE and food production/processing industries comply with the EPA Sewer Pretreatment Regulations. PGIs are high-performance gravity grease interceptors designed to intercept and remove large quantities of sewer clogging FOG and oily food waste before it is discharged in a municipal wastewater treatment system.
Unmatched Quality and Service.
The PEMO AO/AB and AO/AB/DC Series horizontal design pumps are designed for heavy duty slurry and/or acid applications. These rubber lined pumps are the heart of the PEMO product line. Available single and double stages, the AO/AB Series are end suction pumps with single or double mechanical seals. When pumping acid liquids, the shaft and the mechanical seal housing can be made of special alloys.
The PEMO Ultra Hard Metal (750-800 BHN),or hardalloy, horizontal design pumps are recommended for highly abrasive sludges where higher pressures are required. All the main parts, such as casings and impellers, are made completely of Hardalloy. Available single, double and triple stages, the PEMO Hardalloy Series pumps can operate at higher temperatures and for longer cycle times. Custom designed hardalloy pumps can also be provided if required.
PEMO Submersible Pumps are designed for use in deep sumps where a vertical pump would be too costly or impossible to install. They feature air cooled motors with a range of 1 - 100 hp, and up to 3500 rpm. The motors are also furnished with thermal protection and leak detection alarm probes. Standard power cable lengths are 23 ft. (7 meters).
The unique features of the internal coatings give PEMO submersible pumps a broad range of applications. They can pump a wide range of liquids or abrasive slurries with up to 30% suspended solids by weight and particle size up to 20 mm in diameter.
Pump flow capacities range to 3200 gpm with pressures up to 80 psig. They are available in either rubber lined or hardalloy construction, and have double mechanical seals with SC/SC or TC/TC stationary faces versus rotating seal faces.
Highland Tank®'s HighGuard underground tanks combine the structural strength of steel tank construction with the lasting protection of polyurethane coating to produce a high-quality storage tank second to none. HighGuard tanks feature a strong dielectric coating of high solids polyurethane for protection even in the most difficult conditions. Available in single or double wall construction.
Superior performance. Highland's HighGuard technology meets or surpasses all current UL standards. The HighGuard tank is superior in strength and rugged in appearance. All Highland HighGuard tanks are manufactured under strict quality control procedures and carry a 10-year limited warranty.
The ISOLUX® 5 GPM Residential Well System is a proven, affordable Point-Of-Entry arsenic removal solution featuring a user-friendly, easy to load cartridge in a stainless steel housing.
Using a patented Zirconium adsorption filter media, ISOLUX® removes both Arsenic III and Arsenic V simultaneously - in most cases to the non-detect (zero) level.
Clean and convenient. Since ISOLUX® cartridges are sealed, you never come in contact with any messy media. There's no backwashing and practically no maintenance except for annual cartridge replacement and water testing. Once a cartridge is replaced, just throw the old spent one in the garbage.
The ISOLUX® 10 GPM Point Of Entry (POE) System is a proven, affordable whole house and light commercial arsenic removal solution featuring user-friendly cartridges in a stainless steel housing.
The patented ISOLUX® Zirconium adsorption filter media forms an immediate non-leachable arsenic bond that removes both Arsenic III and Arsenic V simultaneously. This means ISOLUX® can deliver the unmatched arsenic removal performance that customers have called for - 99% to non-detect (zero).
The ISOLUX® 15 GPM Commercial System is a new, affordable light commercial arsenic removal solution with easy to load cartridges in a stainless steel housing.
The patented ISOLUX® Zirconium adsorption filter media forms an immediate non-leachable arsenic bond that removes both Arsenic III and Arsenic V simultaneously. This means ISOLUX® can dependably deliver arsenic removal performance from 99% to non-detect (zero).
ISOLUX® cartridges are sealed, so there is never any media contact or spillage. There's no need for backwashing and little maintenance except for annual cartridge replacement and water testing. And once a cartridge is replaced, spent ones can just be thrown in the garbage bin.
The ISOLUX® 25 GPM Central Treatment System (CTS) is a competitively priced, self-contained, rapid deployment arsenic removal system using easy to handle cartridges in a stainless steel housing.
The patented ISOLUX® Zirconium adsorption filter media forms an immediate non-leachable arsenic bond that removes both Arsenic III and Arsenic V simultaneously. This means ISOLUX® can dependably deliver arsenic removal performance from 99% to non-detect (zero).
ISOLUX® CTS systems won't impact existing operations or infrastructure. Installation is quick and simple. Multiple units can be combined to accommodate a broad range of flow rate requirements.
ISOLUX® Engineered Arsenic Removal System housing skids are custom designed and constructed to match application requirements. The flexibility of modular housing skids allows for:
ISOLUX® is the clear choice for small water systems, such as rural utilities, shopping centers, schools, hotels and casinos, RV parks and multi-user wells. Our systems are built rugged for reliability and convenience with easy to load cartridges in stainless steel housings.
The ISOLUX® Zirconium adsorption media forms a non-leachable arsenic bond removing both ASIII and AsV simultaneously from 99% to non-detect levels.
50/100 gpm housing skids are standard ISOLUX® products and carried in stock in our Arizona warehouse for quick availability!
CETCO® FLUORO-SORB® is a proprietary, NSF-certified adsorption media that is proven to effectively treat multiple variants of PFAS. Unlike other sorbent products that are selective and unpredictable in adsorbing PFAS, CETCO® FLUORO-SORB® binds the entire spectrum of PFAS and in a wide variety of removal and remediation processes.
With a specially modified surface, CETCO® FLUORO-SORB® resists competitive adsorption from other water and sediment contaminants making it a more effective and efficient choice.
CETCO® FLUORO-SORB® is commercially available in four variations.
HCP grinder pumps offer you an economically effective solution for delivering sewage and wastewater. Reliable pumps - an experienced company in pump manufacturing. Through constant research, HCP develops the finest pump construction. Thousands of units are operating trouble-free all over the world. High stability and durability are our promise to the customers. HCP pumps are your best choice for residential, commercial, resort applications and the low pressure sewer systems.
Nationwide Tank and Pipe offers a complete line or fiberglass Potable and Non-Potable Tanks, sized to accommodate customer requirements.
These tanks are transported to the customer's location and designed for efficient and quick installation giving the customer a low cost, long-life solution.
Potable water tanks are built to ASTM D4097, ASTM D3299 & AWWA Standards using NSF 61 approved resin with Nexus Liner.
Up to 20 year warranty against manufacturer defect.
Nationwide is proud to contribute to the efforts of water conservation.
Stormwater rivals sewage plant & factories as pollution source of drinking water
All Nationwide FRP potable water tanks include NSF 61 approved resin and Nexus liner
All Nationwide FRP tanks built to ASTM D4097, ASTM D3299 and AWWA standards
We are members of NFPA and follow all NFPA 22 codes
Potable water tanks built to ASTM D4097, ASTM D3299 Standards using NSF 61 approved resins with UV inhibitors
Nexus liner in every tank
Water tested for 24 hours to maximum capacity
Non-corrosive
Modular solution to manage liquids in an environmentally friendly manner
The Stancor™ OIL MINDER® Control and Pump System allows water to be automatically pumped from hydraulic elevator pits without the danger of ejecting potentially harmful oily substances into sewers, rivers and waterways. There is no need for a separate oil-water separator. The product is engineered for efficient and trouble-free pumping, even under the most severe conditions.
Patented conductive sensing technology ensures the most reliable signal and does so in a manner that makes OIL MINDER® nearly maintenance free. Complimentary components, which are UL certified, are then designed to offer the highest level of reliability from installation to operation.
Stancor™ excels in the most demanding applications. SKR heavy-duty slurry pumps are ideal for pumping sludge, slurry and heavily contaminated liquids. The design, and material specification, reflect Stancor™'s unwavering commitment to supply quality products that help our customers become more profitable.
SKR pumps proudly uphold the Stancor™ brand promise for a specific set of application criteria. Wet end components are constructed with abrasive resistant (HRC 58-60 hardness), high-chromium alloy steel. Additionally, long, reliable pump life is bolstered by high efficiency 1,800 RPM motors, class F motor insulation, double mechanical seals, a 410 stainless steel rotor and shaft sleeve, a cooling jacket and heavy-duty, 5-conductor cable.
